11 FT SCAMP 2024
self-built SCAMP sailboat, hull 691, completed July 2024. This is my third boat build — construction used CNC-cut marine plywood from Duckworks, Raka epoxy, and was built to spec from John Welford’s instructions with no modifications. The keel, rudder and lower hull have graphite-loaded epoxy for abrasion protection, the bottom and lowest garboard are fiberglassed, and the mast is a single-piece, knot-free Sitka spruce birdsmouth build with 5 coats of TotalBoat varnish. The boat comes fully rigged with a Neil Pryde sail in tanbark, Dyneema lazy jacks and reefing lines spliced by me, a Ronstan tiller extension, and tiller clutch. The standout feature is an ePropulsion Evo 3HP electric outboard with very few cycles, including a permanently installed interior remote
Please log in to view contact information. Login
